6 minutes reading time (1198 words)

Mastering MONTAGE: Quantize in OS v3.0

MTGWHSM
Quantize functions get even cooler in OS v3.0. This article explains how it all works. 

Quantize: Before, Real Time or After

Quantize is the function that lets you change the positioning of MIDI notes against the time. In the sequencer this can be done as you RECORD, or can be applied to your data after-the-fact. This is your choice. Quantize is one of those "tools" you find in modern sequencers that many feel funny about using. It is the 'ultimate cheat' because it moves your notes from where you actually played them to some other pre-determined position so that the timing is corrected. However, used properly it can be an extremely useful tool.

It is particularly useful for drum programming because it is difficult enough to play musical sounds in time, no less program drum grooves from an interface like a keyboard. When you press the RECORD button, the SETUP screen offers you an opportunity to set a Quantize value. This will be the smallest musical timing interval that the sequencer will record.

For example, if you set the Quantize value to a sixteenth note (120 clock ticks), then all notes played will be placed on the nearest sixteenth note. This can only help you if you are slightly late or slightly early. If you miss the beat entirely and have absolutely no sense of rhythm, QUANTIZE can actually make things worse. It can be used to tighten up loose timing but it cannot fix things if they are too far off. Don't blame the sequencer – it's YOU!!! The wonderful thing about recording, you can always do it over!

There is a Quantize function found on the RECORD SETUP screen which corrects data on the way to the Sequencer. There is also a Quantize function found as a non-destructive PLAY FX which lets you try out different timing values in real-time while your Pattern plays back. And there is a Quantize function found as a Pattern sequencer NOTE Job which rewrites the events on the recorded Track.

The Quantize found among the PLAY FX is non-destructively applied, which means you can try it before applying it permanently by using a “Normalize Play FX” Job. Here are the details:

Before

RECORD QUANTIZE: On the RECORD SETUP screen you can opt to set the Quantize parameter - the setting here will mean that the selected value is the smallest possible timing subdivision you can document. In other words, your notes will always be moved to the nearest value as set:

QuanOS3001
In the PATTERN RECORD screenshot, “Rec Quantize” is set to a sixteenth note (120 clock ticks), this value is usually good enough for tightening up recording when working on drums, but can be used at any time for any type of recording. It is a personal decision - once you quantize via this method it cannot be undone. You would have to record it again.

Real Time

PLAY FX QUANTIZE: From the main PATTERN screen you can tap “Edit/Job” > “PLAY FX 1” and reach a set of tools that allows you to "try out" various quantize and swing quantize functions before you commit to them: 

QuanOS3002
These non-destructive functions let you change quantize, the percentage quantize, even create a swing feel or triplet feel (shuffle) from what you played. You get to hear immediately how you are adjusting the data: 

QuanOS3003
There is a “Normalize Play FX” Job that will allow you to make your settings permanent by rewriting the data in the track. PLAY FX are a great way to experiment with the positioning of the notes and more. Swing functions include Velocity and Gate (duration) parameters which can radically change the feel of what was played.

After

QUANTIZE JOB: Touch “Edit/Job” > “Note” > Quantize
Quantize can be strict or loose because it is programmable. If, for example, you are a little off at a particular point you can use the quantize job to move your notes to nearest musical value of your choosing: 

QuanOS3004
The resolution of the sequencer is 480 pulses per quarter note (ppqn). This means it divides each quarter note into 480 equal parts. That is, 1920 clock ticks per 4/4 measure.

480ppqn = 1/4 note, 4 quarter notes per measure in 4/4
240ppqn = 1/8 note, 8 eighth notes per measure in 4/4
120ppqn = 1/16 note, 16 sixteenth notes per measure in 4/4
60 ppqn = 1/32 note, 32 thirty-second notes per measure in 4/4

320ppqn = 1/4 note triplet, 6 quarter note triplets per measure in 4/4
160ppqn = 1/8 note triplet, 12 eighth note triplets per measure in 4/4
80 ppqn = 1/16 note triplet, 24 sixteenth note triplets per measure in 4/4

Picture in your mind's eye that quantize is as follows: the resolution of the sequencer is 1920 pulses per 4/4 measure. Each of these "Clock ticks" is a pin sticking up; 1,920 of them per measure... and your notes are like ping-pong balls, that when dropped, must land on one of these pins.

There are major pins (1-foot long) every 480 - those are your quarter notes. There are pins (half as long) every 240 pins - those are your eighth notes. There are pins half again as long every 120 pins... and so on.

Although quantizing during record can be used to tighten-up your timing, you have the options of recording your data without quantize and applying it, where necessary, after the fact. This is accomplished with the Quantize NOTE Job. When you apply quantize after the fact, you have more options about how this timing correction is applied... including allowing you to artfully change the feel of the music.

Let's say you are trying to land on an "1/8 note" pin and you are late by 12 clock ticks, er, a pins. Quantize (at 100% Strength) will move your ping-pong ball (note) to the nearest pin that represents the value you select. If you set the "Strength" to 50% what this means is that it will move your note half the distance to the strict value. In my example you missed the 8th note pin by 12 ticks late, meaning you might have landed on clock tick 252 when attempting to land on clock tick 240. A quantize to the nearest 8th note (240) with a 50% Strength will move you 6 ticks toward a value divisible by 240; to 246... which is half way between 240 and 252.

When using the QUANTIZE job you can select a measure, beat and clock tick range over which to impose it. You can select a quantize value, a Strength %, a Swing Rate (which offsets the upbeat value up to 50% of the quantize value), Gate Time (changes the duration of notes, careful here - this will mess with your feel). Once you execute a quantize, listen closely to what it has done. You can UNDO it, as well.

The last JOB executed on a track can be undone.
Touch “Overview” > “Undo Last”
“Redo Last”

For more on the subject of SWING and PLAY FX QUANTIZE please see the following article:
"Swing Quantize and the Play FX"

Questions/comments? Join the conversation on the Forum here.

Music Production Guide, Issue 07/2019 Available NO...
Mastering MONTAGE: Scenes in OS v3.0

Related Posts

2018 © Yamaha Corporation of America and Yamaha Corporation. All rights reserved.