Notifications
Clear all
Legacy Yamaha Synths
4
Posts
2
Users
0
Likes
3,811
Views
Topic starter
Hi,
I use my MOX6 with my MX49 live and occasionally I find myself in situations where I only have one input on the house amp and I don't always have a mixer with me.
In these instances I'd like to be able to plug the MX49 into the MOX6 via the AD input. I play the MOX6 in master mode accessing song/pattern mode or just in performance mode by itself.
Will the AD input function in master mode while accessing a song/pattern?
I found a good article on the MOXF here, just couldn't find the specific info on the MOX.
Thanks!
Ben
Posted : 04/06/2016 6:16 pm
Will the AD input function in master mode while accessing a song/pattern?
Yes. All articles on the MOXF, except those referring to the Flash Boards, apply to the MOX. Master is just a mode to organize the others... you setup the Audio input in the Song or Pattern MIXING... Store the SONG or PATTERN, then return to your MASTER.
Plug the L/R audio outputs of the MX to the A/D Inputs on your MOX
The default setting for MIC/LINE is LINE - this is what you need.
If you have other questions, post back here.
Posted : 04/06/2016 7:08 pm
Topic starter
Do I have to change the settings for each song/pattern or can I just change the general settings for song/pattern mode?
Posted : 04/06/2016 7:58 pm
The UTILITY mode setting for MIC/LINE is global and will be set for the entire MOX.
[UTILITY] > [F1] GENERAL > [SF6] OTHER
You can customize the settings for the AUDIO IN PART on a per SONG/PATTERN basis, applying different Effects, changing the stored volume, pan position, etc.
Press [MIXING] > [EDIT] > [COMMON] > [F5] A/D IN
Posted : 04/06/2016 10:52 pm
