Notifications
Clear all
MOXF Series Music Production Synthesizers
2
Posts
2
Users
0
Likes
1,705
Views
Topic starter
Hello!
I am using Yamaha MoXF6 which is directly connected to studio monitors using its L/R unbalanced outputs
The problem is there's a little cracking noise or distorted noise from the Right output
I tried changing the cables and also tried interchanging the monitors(L&R) and came to a conclusion that the cracking noise is only from the right output of the MoXF
The left output is completely fine
Plz note the cracking noise is only in the high mids and high frequency area(last two octaves of MoXF6)
I tried managing the gain and Q factor which does reduces the cracking a little bit
What should be the problem?
Is that a hardware problem?
Posted : 06/07/2020 4:55 pm
You can further narrow the potential causes by plugging in a set of headphones to the MOXF - Since the same signal is duplicated at the Phones output, if you hear the cracking in the Phones it will tell us that the issue internal to the MOXF. If you do not hear the same cracking sound then the problem is likely a physical issue with the right analog output jack.
Posted : 06/07/2020 9:48 pm
