YamahaSynth.com Forums

This is the place to talk about all things related to Yamaha Synthesizers!
  1. Jon
  2. MOXF
  3. Monday, 25 July 2016
I'm looking to seamlessly transition voices and sections in MOXF using footswitch (FS). This is beneficial when two hands are busy on stage. I can only switch from song to song or pattern to pattern using [Utility]->[CTLASN]-> [FT SW]-> cc98 PCInc setting.

Is there any way to assign the footswitch to change tracks or sections?
Responses (6)
Bad Mister
Yamaha
Accepted Answer Pending Moderation
Is there any way to assign the footswitch to change tracks or sections?
No, the Foot Switch cannot send such a command.
  1. more than a month ago
  2. MOXF
  3. # 1
Accepted Answer Pending Moderation
Thank you Bad Mister for such quick reply
  1. more than a month ago
  2. MOXF
  3. # 2
Bad Mister
Yamaha
Accepted Answer Pending Moderation
Sorry for the lack of details, was on the run... The Foot Switch is limited to send a kind of message called a Channel message. So it can be used to address things on a specific MIDI channel, the channel the message is applied. It can be used to hold (sustain), or activate/deactivate something on the channel.

What it cannot do is generate a global message that can tell the instrument to change Tracks or Sections. I'm not saying this is not possible, just that this is not how it is implemented in the MOXF.

To change Tracks you must touch one of the 16 dedicated Track Select buttons... This action also changes the current Keyboard Transmit Channel..
To change Pattern Sections you must touch one of the 16 dedicated Pattern Section buttons... This is a global Parameter Change message (which cannot be issued by a simple foot switch).

What is it you need to do?
  1. more than a month ago
  2. MOXF
  3. # 3
Accepted Answer Pending Moderation
Hi,
I need to change pattern section from à midi footswitch ( programmable source audio soleman) but i don't find thé message I have to programme on the data list.pdf.
I Can change song, pattern, but what about pattern section.

Thanks
  1. more than a month ago
  2. MOXF
  3. # 4
Bad Mister
Yamaha
Accepted Answer Pending Moderation
Section Change (Pattern Mode, only) is handled by a System Exclusive message (Data List page 120)

F0 43 7E 00 ss dd F7

ss = Section A-P (00-0F)
dd = data byte (7F)

Section A = F0 43 7E 00 00 7F F7
Section B = F0 43 7E 00 01 7F F7
.
.
.
Section P = F0 43 7E 00 0F 7F F7
  1. more than a month ago
  2. MOXF
  3. # 5
Accepted Answer Pending Moderation
It was "SECTION CONTROL F0H 43H 7EH 00H ssH ddH F7H"?

Thank you so much!! Happy new year to all of you at yamaha, that's a really pro support!!:D
  1. more than a month ago
  2. MOXF
  3. # 6
  • Page :
  • 1


There are no replies made for this post yet.
Be one of the first to reply to this post!
2018 © Yamaha Corporation of America and Yamaha Corporation. All rights reserved.