YamahaSynth.com Forums

This is the place to talk about all things related to Yamaha Synthesizers!
  1. Ben
  2. Sherlock Holmes The Voice
  3. MOXF Series Music Production Synthesizers
  4. Thursday, 27 June 2019
Hi,

I was curious if there is an easy way to use the assignable foot switch on the MOXF to toggle the AF1 button on and off?

Thanks!
Responses (2)
Bad Mister
Yamaha
Accepted Answer Pending Moderation
Yes, there is...
Press [UTILITY]
Press [F4] CTL ASN (Control Assign)
Press [SF1] ASSIGN
Here you learn that AF1 defaults to 86
Press [SF2] FT SW
Set the FS = 86
This make the Foot Switch = AF1 and allows it to operate it.

If you use a momentary FS Sustain-Type (TS- Tip/Sleeve) FC4/FC5 Type it will act as a momentary switch
If you use a clickable FS, then each click will switch and hold the setting.
Accepted Answer Pending Moderation
Thanks Phil!!
  • Page :
  • 1


There are no replies made for this post yet.
Be one of the first to reply to this post!
2021 © Yamaha Corporation of America and Yamaha Corporation. All rights reserved.