YamahaSynth.com Forums

This is the place to talk about all things related to Yamaha Synthesizers!
  1. gianni
  2. MOXF Series Music Production Synthesizers
  3. Wednesday, 12 September 2018
I created a voice of strings + a wave of flute.
The flute works correctly by pressing the AF1 button and the LED lights up.
Importing it in Song mode works correctly but the AF1 LED does not light up.
why? what parameter should I set?
Responses (1)
Bad Mister
Accepted Answer Pending Moderation
Not sure, it should light up when you press it.

The issue should be whether it stays lit (latch) or turns off as soon as you let go (momentary).
This is a parameter you can set for each Song Mixing or Pattern Mixing Program

From [SONG]/[PATTERN] mode
Press [MIXING]
Press [EDIT]
Press [COMMON]
Press [F1] GENERAL

Here you can set “Latch” or “Momentary” for the AF1/AF2 buttons.

Let us know.

If it is not lighting up go back to your User Voice and make sure you stored the Voice with the AF1 parameter set. It is quite normal for it to be OFF initially, and light when you touch it.
  • Page :
  • 1

There are no replies made for this post yet.
Be one of the first to reply to this post!
2021 © Yamaha Corporation of America and Yamaha Corporation. All rights reserved.